MOVAX Piling drills are excavator-mounted, telescopic/kelly bar-type auger drive attachments for cast in-situ (concrete) piling.
MOVAX Piling drills are explicitly designed for soil removal tasks. MOVAX piling drills are especially suitable for work in confined spaces while still being good at reaching over obstacles. The telescopic/ kelly bar design keeps the drill height low and allows working on sites with limited headroom without compromising on drilling depth.
Versatility based on the MOVAX Modular System™ including a wide range of lead augers in different sizes and for different soil conditions enabling the use of the same unit for a wide range of different piling requirements.
The suitable MOVAX piling hammer-model is selected based on the soil & site conditions, the excavator and the main dimensions (weight & length) of the piles to be driven. The configuration is then defined by the type of piles.
The excavator must be suitable – and match – the specific piling drill in question in regards to hydraulic power (oil flow @ pressure) and it must also have the sufficient handling capacity for stable operation. Therefore the excavator brand & model is needed for the correct selection of the MOVAX drill hammer model.
MOVAX piling drills are the optimum solution for a wide range of soil conditions and the lead auger can be selected for a range of different type of conditions from clay to rock.
In order to select the correct MOVAX piling drill model, the pile and/or casing dimensions (depth/length, diameter) are needed. Due to the modular design the same MOVAX piling drill can be used for a different type of piling works.
MOVAX piling drills are the optimus solutions for a wide range of different type of construction sites – and especially for sites with limited access, space or headroom; for instance when working on the rail roads.
MOVAX piling drills are designed for medium to large size crawler or wheeled excavators and rail roaders and utilised for a wide range of piling and foundation applications ranging from civil, road and rail to utilities, environmental & energy and piers & waterways.
MOVAX KB -piling drills are heavy duty, kelly bar -type piling drills with a maximum piling depth of 20 meters. The KB is intended for larger size excavators and rail roaders.
|Weight**||kg||6700||5 300-5 800|
|Oil flow rate||l/min||100–200||100–200|
|Hole diameter||mm||420–1 500||420–1 500|
|Drill speed range||rpm||10–120||10–120|
|Side tilt angle||°||±15||±15|
|Excavator class****||35–50||(30) 35–50|
|model||clay, rock or heavy duty|
|outer diameter||mm||420-1 500||420-1 500|
* drilling depht of KB-70S dependent on length of kelly bar
** excluding adapter and lead auger; weight of KB-70S dependent on length of kelly bar
*** without lead auger
**** excavator either stick or boom mounted; suitability to be checked
MOVAX TAD-piling drills are telescopic piling drills with a maximum piling depth of 9 meters. The TAD is intended for medium to large size excavators and rail roaders.
|Oil flow rate||l/min||75-250|
|Hole diameter||mm||400–1 000|
|Drill speed range||rpm||11–74|
|Side tilt angle||°||±30|
|outer diameter||mm||400-1 000|