MODULAR SYSTEM

SIDE GRIP PILE DRIVERS

The MOVAX Modular System (MMS™) enables the use of the same MOVAX side grip pile driver for a wide range of different type of piles ranging from sheet piles, H-beams and tubular steel piles to timber piles. The MOVAX Modular System includes interchangeable arms, clamps and pads that can easily and efficiently be changed for the different pile types in question.

NOTE! The MOVAX side grip pile driver is always equipped with one arm/clamp system. The unit is equipped with either sheet pile arms, modular arms or modular tube arms, and the standard bottom clamp. The modular arms can further be equipped with clamps for sheet piles, tube piles or timber piles. The tube arms are equipped with the desired size tube pile clamps.

MODULAR ARMS

Modular arms are suitable for driving sheet piles, H-beams, timber piles and tubular steel piles. Individual tube clamps are utilised for tubular steel piles up to OD 762 mm and Sheet pile clamps with Tube pads up for tubular steel piles up to OD 273 mm. Modular arms are available for all MOVAX side grip pile driver models SG-15N...SG-75(V).

Note! Each tube size requires its own tube clamps/pads in order to ensure proper operation, whereas a range of timber piles can be driven with the same timber clamps.

TUBE ARMS

Special modular tube arms are utilised to handle and drive large diameter tubes from 508 mm up to OD 1220 mm. A tandem bottom clamp is available for the same tube sizes as the tube arms. Tube arms are available for MOVAX side grip pile driver models SG-45(V)...SG-75(V)
NOTE! Each tube size requires its own tube clamp in order to ensure proper operation.

SHEET PILE ARMS

Special sheet pile arms are the optimum solution when handling, pitching, driving and extracting only – or mainly – sheet piles and/or H-beams. The special sheet pile arms can also be utilised to drive smaller diameter tubular steel piles or micropiles up to OD 273 mm. Each tubular steel pile size requires its own, individual tube pads. Sheet pile arms are available for MOVAX side grip pile driver models SG-45(V)...SG-75(V).


NOTE! Each tube size requires its own tube pads in order to ensure proper operation.

SHEET PILE PADS

for sheet piles and H-beams

Standard sizes
w 400–1200 mm / H180–H500

Tube pads

for tubular steel piles
from OD 88.9 mm to OD 273 mm

Standard sizes
Ø 88.9, Ø 101.6, Ø 114.3, Ø 127, Ø 139.7, 
Ø 168.3, Ø 219.1 and Ø 273

Customised sizes are available by request.

CUSTOMISED PADS

for rail tracks etc profiles

Customised pads and sizes are available upon special request