• Excavator-mounted, hydraulic, impact-type piling hammer. Utilised to drive load-bearing tubular steel piles, H-piles and timber piles or assiting in sheet pile driving even in the most difficult soil conditions. Also used in conjunction with side grip pile drivers to complete a pile installation after reaching refusal or when load testing is required.
  • The excavator mounting incorporates a 1.3 m leader. The piling hammer can also be mounted on an excavator-mounted leader mast.
  • Standard mounting with pin adapter (tilt +/-15º, no rotation).
  • Available with drive caps for a range of different pile sections.
  • Controlled with the MOVAX Control System (MCS™); MCS Lite, MCS Pro or MCS Pro+auto.
  • Reporting and documentation of piling works with M-logbook™ (optional, requires MCS Pro or MCS Pro+auto).

Technical data

Weight (excl. adapter)kg5390
Blows per minute1/min0 - 100
Drop heightmm0 - 1200
Frame widthmm650
Impact energykNm0 - 35
Oil flow ratel/min120 - 0
Operating pressurebar250
Pressure relief set maxbar350
Ram weightkg3000
Swing angle°+/- 0
Tilt angle°+/- 15
Rotation angle°+/- 0
Transport depthmm1870
Transport widthmm1200

Excavator size class
33-40 tons

Selected references

Electrified highway

Electrified highway

Sivenmark AB operated Movax SG-75 and new DH-30 piling hammer, as a subcontractor to Rosenqvist Rail AB, at new highway experimental project...

Read case »